HPI Racing 1/12 Wheely King 90T Spur & 21T Pinion Gears, Motor Plate, & Gear Cover

HPI Racing 1/12 Wheely King 90T Spur & 21T Pinion Gears, Motor Plate, & Gear CoverMotor Plate (Part # 86818) 2. 5mm Orange or Purple Anodized Aluminum Construction (Color Cannot Be Specified) 90 Tooth 48 Pitch Spur Gear (Part # 6990) 21 Tooth 48 Pitch Pinion Gear (Part # 6921) Pinion Gear Set Screw (Part # Z700 Partial) Gear Box Cover (Part # 85251 Partial) Drive Gear Hub (Part # 85259 Partial) Five (5) 3 x 8mm Binder Head Screws (Part # Z517 Partial) Four (4) 3 x 10mm Binder Head Screws (Part # Z567 Partial) Two (2) 3 x 6 mm Cap

the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash in order to fit correctly

This is the Electronics Box

These are the Turnbuckles and Wrench for the Traxxas TRX-4

Part # 05800

This is a set of Grey Satellite Tire Gluing Rubber Bands by JConcepts

The PRO-Arms are direct replacements for the stock Slash 2wd arms and are designed from the ground up to be nearly indestructible

5mm further inwards to improve the left/right balance with today’s modern light batteries

This is the Temp-Insure Infrared Thermometer by Racers Edge and is a versatile accessory for monitoring operating temperatures of nitro engines

Part # CZR97400412

Two (2) Dirt Buster Rear Block Tires (Part # 4834)

44T Transmission Gear (Part # 79614)

It is the best size for touring cars